Programming the camera (time-lapse)

You can program the camera to save images periodically (time-lapse).

Follow this procedure:

  1. Push the navigation pad to display the menu system.

  2. Select (Recording mode) and push the navigation pad. This displays a submenu.

  3. Select (Time-lapse).

  4. Push the navigation pad. This displays a dialog box where you can set the save conditions:

    • Save interval: Use the navigation pad to set the time interval between each saved image.

    • Total number of images: Periodic saving will stop when the set number of images have been saved.

      Note

      If you select “∞,” the camera will keep on saving images until the memory card is full or until you manually stop the time-lapse.

  5. Push the navigation pad. This closes the dialog box.

  6. The time interval is displayed at the top of the screen.

  7. To start the time-lapse (periodic saving), push the Save button.

  8. To manually stop the time-lapse, push the Save button.

  9. When the time-lapse is completed, an information screen is displayed. Push any button or touch the screen to return to the live image.