Quick start guide

  1. Install the FLIR ONE app, developed by FLIR Systems, from your preferred app store.

  2. Attach the FLIR Edge camera to the back of your mobile device by pulling out the extending arm until the camera is clamped around the device. As an alternative, place the FLIR Edge camera close to your mobile device.

    Note

    To prevent damage to the equipment, avoid extending the arm to its end position.

  3. To turn on the FLIR Edge camera, press and hold the On/Off button. Release the button immediately as soon as the LEDs start flashing. The flashing LEDs indicate that the camera is booting up. It takes about 20 seconds for the camera to finish booting, then it will start and the LEDs will show a steady light.

  4. Start the FLIR ONE app on your mobile device.

  5. The FLIR ONE app will guide you to set up the app according to your preferences and to connect (pair) the camera with your mobile device.

  6. To turn off the FLIR Edge camera, press and hold the On/Off button until the LEDs turn off.