Safety information
Radio
Applicability: Class B digital devices.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Applicability: Digital devices subject to 15.19/RSS-GEN.
NOTICE: This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
Applicability: Digital devices subject to 15.21.
NOTICE: Changes or modifications made to this equipment not expressly approved by FLIR Systems may void the FCC authorization to operate this equipment.
Applicability: Digital devices subject to 2.1091/2.1093/KDB 447498/RSS-102.
Radiofrequency radiation exposure Information: The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business Law (電気通信事業法). This device should not be modified (otherwise the granted designation number will become invalid)
The 5 GHz band is only allowed for indoor use in Japan and Canada.
FLIR Systems AB declares that the radio equipment type FLIR Ex Pro series is in compliance with Directive 2014/53/EU.
Radio operates in standard 802.11 b/g/n in frequency range 2400-2480 MHz and 5150 – 5250 MHz with max output power 15 dBm.
Battery and charging
If you do not obey these Warnings, an explosion or an ignition can occur. This can cause injury to persons and damage to the equipment.
Do not disassemble or do a modification to the battery.
Do not continue to charge the battery if it does not become charged in the specified charging time.
Do not use the battery if there is an unusual smell from the battery, if the battery feels hot, changes color, changes shape, or is in an unusual condition.
If there is a leak from the battery and you get the fluid in your eyes, do not rub your eyes. Flush well with water and immediately get medical care. The battery fluid can cause injury to your eyes.
If you do not obey these Cautions, damage to the equipment can occur.
Only use the battery, battery charger, and power supply that FLIR Systems supplies.
Do not get water on the battery, or permit the battery to become wet.
Remove any water or moisture on the battery before you install it.
Do not hit or cause shocks to the battery.
Do not connect the positive and negative terminals of the battery to each other with a metal object (such as wire).
Do not put the battery near high-temperature locations or into direct sunlight.
Only use the battery in temperatures between -15°C and +50°C (5°F and 122°F).
Only charge the battery in temperatures between 10°C and 45°C (50°F and 113°F).
When the power supply (AC adapter) is used, the battery must not be charged at an ambient temperature above 35 °C (95°F).
Do not attach the battery directly to a car’s cigarette lighter socket. Use the adapter that FLIR Systems supplies.
When the battery is worn, apply insulation to the terminals with adhesive tape or equivalent materials before you discard it.
When you connect the power supply to a mains socket, select a socket that is easy to access. Should a hazardous situation occur, you must be able to easily disconnect the power supply.
Handling and operation
The camera must not be accessible to children. The camera includes a coin cell battery. If swallowed, a coin cell battery can cause injury or death.
If you do not obey these Cautions, damage to the equipment can occur.
Make sure the beams from strong energy sources (for example, the sun or devices that emit laser radiation) do not go into the camera lens or the viewfinder.
Do not use the camera in temperatures more than 50°C (122°F).
Do not apply solvents or equivalent liquids to the camera, the cables, or other items.
Be careful and do not use too much force when you clean the infrared lens. The lens has an anti-reflective coating which is easily damaged.
The encapsulation rating is only applicable when the cover for the connector compartment is closed and locked in place and when the battery is correctly installed.
Declaration of conformity
The full text of the Declaration of conformity is available at the following internet address: https://support.flir.com/resources/2758.