Getting started

Note

Before operating the camera, you must read, understand, and follow the warnings and cautions in section Safety information.

  1. Fully charge the battery.

  2. Remove the battery cover.

  3. Align the battery and push it into the camera battery compartment.

  4. Place the battery cover onto the battery and press it gently until it clicks into place.

  5. Briefly press the On/Off button to power on the camera. The green Power LED indicates that the camera is on.

  6. Wait until the camera screen turns on. The camera is now ready to use.

  7. Follow the instructions on the camera screen to set up the camera according to your preferences.

    Applicable to camera models with Wi-Fi: You can also set up the camera to upload snapshots and videos for storage online. To enable upload, you must connect the camera to the internet and pair the camera with the FLIR Acoustic Camera Viewer cloud service. Use a computer or other device with internet access and follow the instructions on the camera screen.

    Note

    You can select the settings as a part of the initial setup of the camera or later at any time via the Settings menu.

  8. Aim the camera toward the object of interest.

    The camera will highlight any detected sound source on the screen.