Pairing Bluetooth devices

You can use the camera with the following Bluetooth devices:

  • METERLiNK devices (FLIR meters).

  • Bluetooth-enabled headsets.

Before you can use a Bluetooth device with the camera, you need to pair the devices. The Bluetooth functionality is managed from the Settings menu. You can also enable/disable Bluetooth on the swipe-down menu. For more information, see section Swipe-down menu.

Follow this procedure:

  1. Push the joystick to display the menu system.

  2. Select (Settings) and push the joystick. This displays the Settings menu.

  3. Use the joystick to select Connections > Bluetooth.

  4. If the Bluetooth check box is unchecked, push the joystick to enable Bluetooth.

    Note

    You also need to ensure that the external Bluetooth device is in visible mode.

  5. Select Available devices and push the joystick.

  6. Wait until a list of available devices is displayed. This will take about 15 seconds.

  7. When a Bluetooth device is found, select the device to add it, and begin the pairing procedure. The device is then ready to be used.

Note

  • Only METERLiNK devices (FLIR meters) and Bluetooth-enabled headsets will appear in the list of available devices.

  • You can add several devices.

  • You can remove a device by selecting the device and then selecting Unpair device.

  • After adding a METERLiNK device, such as the FLIR MR77 or FLIR DM93, the result from the meter will be visible in the result table and stored with the images. For more information, see section Fetching data from external FLIR meters.

  • After adding a Bluetooth-enabled headset, it is ready to be used for adding voice annotations.