Configuring Wi-Fi

Depending on your camera configuration, you can connect the camera to a wireless local area network (WLAN) using Wi-Fi, or let the camera provide Wi-Fi access to other devices.

You can connect the camera in two different ways:

  • Setting up the camera as a wireless access point. This method is primarily used with other devices, e.g., an iPhone or iPad.

  • Connecting the camera to a wireless local area network (WLAN).

The Wi-Fi functionality is managed from the Settings menu. You can also enable/disable Wi-Fi on the swipe-down menu. For more information, see section Swipe-down menu.

Setting up a wireless access point

  1. Push the joystick to display the menu system.

  2. Select (Settings) and push the joystick. This displays the Settings menu.

  3. Use the joystick to select Connections > Wi-Fi.

  4. Select Share and push the joystick.

  5. (Optional step.) To display and change the parameters, select Share settings and push the joystick.

    • To change the SSID, select Network name (SSID) and push the joystick.

    • To change the WPA2 password, select Password and push the joystick.

    Note

    These parameters are set for your camera’s network. They will be used by the external device to connect that device to the network.

Connecting the camera to a WLAN

  1. Push the joystick to display the menu system.

  2. Select (Settings) and push the joystick. This displays the Settings menu.

  3. Use the joystick to select Connections > Wi-Fi.

  4. Select Connect to network and push the joystick.

  5. To display a list of the available networks, select Available networks and push the joystick.

  6. Select one of the available networks and push the joystick.

    Note

    Password-protected networks are indicated with a padlock icon, and for these you will need to enter a password the first time you connect to the network. After that the camera will connect automatically to the network. To disable the automatic connection, select Forget network.

Note

Some networks do not broadcast their existence. They appear in the list as Untitled. To connect to such a network, you will be prompted to enter additional parameters.